What is devices and their role on the network. Network Media. Local Area Networks - LAN. Wide Area Networks - WAN.
Network media is any audio, video, images or text, used on a computer network, like the Internet. It almost always requires a computer to send and receive, as well as a community of people to create and consume the content. Network media are decentralized and contributed by many people, who not only provide it to others, but are also recipients and users of the media.
A local area network (LAN) is a computer network that interconnects computers within a limited area such as a residence, school, laboratory, university campus or office building and has its network equipment and interconnects locally managed. By contrast, a wide area network (WAN), not only covers a larger geographic distance, but also generally involves leased telecommunication circuits or Internet links.
Ethernet and Wi-Fi are the two most common transmission technologies in use for local area networks. Historical technologies include ARCNET, Token ring, and AppleTalk.
Many LANs are now based partly or wholly on wireless technologies. Smartphones, tablet computers and laptops typically have wireless networking support built-in. In a wireless local area network, users may move unrestricted in the coverage area. Wireless networks have become popular in residences and small businesses, because of their ease of installation. Guests are often offered Internet access via a hotspot service.
A wide area network (WAN) is a telecommunications network or computer network that extends over a large geographical distance. Wide area networks are often established with leased telecommunication circuits.
Business, education and government entities use wide area networks to relay data among staff, students, clients, buyers, and suppliers from various geographical locations. In essence, this mode of telecommunication allows a business to effectively carry out its daily function regardless of location. The Internet may be considered a WAN.
Related terms for other types of networks are personal area networks (PANs), local area networks (LANs), campus area networks (CANs), or metropolitan area networks (MANs) which are usually limited to a room, building, campus or specific metropolitan area respectively.
Describe the classful IP Addressing.
Classful addressing, formally adopted as part of the Internet Protocol (IP) in RFC 791, was the Internet's first major addressing scheme. The IP address was 32 bits in size, just as today, but was managed considerably differently.
There were three address classes to chose from: A, B, or C, corresponding to 8-bit, 16-bit, or 24-bit prefixes. No other prefix lengths were allowed, and there was no concept of nesting a group of 24-bit prefixes, for example, within a 16-bit prefix.
|
|
|
An address was slotted into one of three address classes based on its high-order bits. Addresses beginning with 0 were considered class A; addresses beginning 10 were class B; addresses beginning 110 class C. Two other classes were also defined, class D addresses beginning 1110 and class E addresses beginning 1111, though neither of these two address classes were normally used. For humans, the easiest way to distinguish between different address classes is to use the first decimal number in the IP address:
First octet Address Class
0-127 Class A
128-191 Class B
192-223 Class C
224-239 Class D
240-255 Class E
For example, 128.8.74.1 is a Class B address because the first octet, 128, lies in the 128-191 range. Likewise, 10.10.191.1 is a Class A address (because the first octet is 10) and 208.130.29.33 is a Class C (because the first octet is 208). If this seems at all confusing, convert these addresses into binary and verify for yourselves that the initial bits correspond to the pattern shown in the diagram.
Upon installing a new Internet connection, the network engineer would request a Class A, B, or C network, depending on the expected size of the installed network. For example, the U.S. Department of Defense, a very large network, was assigned a Class A; the University of Maryland, a typical mid-sized network, was assigned a Class B network; and a small consulting firm I once worked for was assigned a Class C network.
The Internet Assigned Numbers Authority (IANA) oversaw all classful network assignments. Only the network bits were assigned by IANA. For example, a request for a Class C network might have been met by assigning 192.17.34.0. As a Class C, the first three bytes were fixed by IANA, and the last byte was assigned by the local network administrator. No attempt was made to assign the addresses in a hierarchical fashion. The first Class B assigned was 128.1.0.0, the next was 128.2.0.0, and so on.
|
|
|
Routers processed packets according to their classful network. For example, consider a packet addressed to 130.17.44.2. First, the address is determined to be a Class B (its two high bits are 10), then split to determine its membership in the 130.17.0.0 classful network. The routing table would have an entry for each classful network, in this case 130.17.0.0, which would determine how the packet should be delivered.
Дата добавления: 2018-06-01; просмотров: 1089; Мы поможем в написании вашей работы! |
Мы поможем в написании ваших работ!